Contents - Index


Plate with eccentric hole under tension



Function SCF_14 returns the stress concentration factor for a finite width plate with an eccentric hole subject to tension applied along its length. 

Inputs:
H - the width of the plate  ([m] or [ft])
e - the distance of the hole from the edge (either edge may be used)  ([m] or [ft])
d - the diameter of the hole  ([m] or [ft])
t - the thickness of the plate  ([m] or [ft])

Example: 
$Load Mechanical Design
$UnitSystem SI K Pa 
H=0.32 [m]
e=0.025 [m]
d=0.025[m]
t=0.021 [m]
SCF=scf_14(H,e,d,t)

{Solution:
SCF=2.148
}


Reference:  Sjostrom, S., 1950, "On the Stresses at the Edge of an Eccentically Located Circular Hole in a Strip
under Tension," Aeronaut. Research Inst. Sweden Report No. 36, Stockholm. in Pilkey, Walter D. (1997). Peterson's Stress Concentration Factors (2nd Edition). John Wiley & Sons. p. 258. Online version available at: http://www.knovel.com/knovel2/Toc.jsp?BookID=583&VerticalID=0

Stress Concentration Factors Index