R1234yf
R1234yf provides thermodynamic and transport property data for HFO-1234yf (2,3,3,3-tetrafluoropropene, MW 114.04116 g/gmole). The thermodynamic properties are based on the information provided in
Markus Richter, Mark O. McLinden, and Eric W. Lemmon
"Thermodynamic Properties of 2,3,3,3-Tetrafluoroprop-1-ene (R1234yf): Vapor Pressure and p-rho-T Measurements and an Equation of State"
Journal of Chemical and Engineering Data, 2011, 56, 3254-3264
The equation of state is valid for temperatures ranging from 220 K to 410 K at pressures up to 30 MPa. Enthalpy and entropy values are referenced to 200 kJ/kg and 1 kJ/kg-K respectively for saturated liquid at 273.15 K.
Viscosity
Viscosity is determined using the information from:
Huber, M.L., and Assael, M.J.,
"Correlations for the viscosity of 2,3,3,3-tetrafluoroprop-1-ene (R1234yf) and trans-1,3,3,3-tetrafluoropropene (R1234ze(E))"
Int. J. of Refrigeration, Vol 21, pp. 39-45, (2016)
Thermal Conductivity
Thermal Conductivity is obtained from the correlation provided by:
Perkins, R.A. and Huber, M.L, "Measurement and Correlation of the Thermal Conductivity of 2,3,3,3-Tetrafluorprop-1-end (R1234yf) and trans-1,3,3,3-Tetrafluoropropene (R1234ze(E))
J. of Chemical & Engineering Data, 56, 2011, pp. 4868-4874.
Note that the critical enhancement contribution is not implemented.
Surface tension data are provided using the information in:
Mulero, A., Cachadina, I, and Parra, M.
"Recommended Correlations for the Surface Tension of Common Fluids"
J. Phys. Chem Ref. Data, Vol. 41, No.4, 2012